Arlows aluminium fitting - 90° block angle - black Dash 6 ( 9/16 - 18 UNF )

13,90 €

incl. 19% VAT , plus (Paketversand)

From	Unit price
2	13,34 €*
3	13,48 €*
5	12,93 €*
6	13,07 €*
9	12,65 €*
10	12,51 €*

Colour
Size

Available now!
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Description

ALU AN 90° BLOCK AR8374

Arlows Aluminium AN Dash Fitting 90° Block Angle

90° like AR8373, only flatter.
Anodized aluminium fitting as a block angle. The right angle sits closer to the part than a standard 90° fitting. For steel flex in fuel, oil, cooling and hydraulics where the bonnet, frame or cooler pack will not clear the standard sweep. For PTFE hose use PTFE fittings.

BLOCK ANGLE

Compact body. Less height than a classic 90° sweep, same joint.

90° TURN

The line leaves at a right angle without the wide radius of the standard fitting.

ANODIZED ALU

Light, corrosion resistant, race look. Pick colour above.

AN DASH

Fits common steel flex. Pick size above, threads in the table.

Use cases

Tight bays: under the bonnet, at the turbo, between cooler pack and block
Fuel and oil: rail, oil cooler, catch can with little clearance to the body
Cooling and hydraulics: a low 90° exit at the stub

Technical data

Dash	Thread	ID	OD
Dash 4	7/16-20 UNF	5.56 mm	11.13 mm
Dash 6	9/16-18 UNF	8.73 mm	13.89 mm
Dash 8	3/4-16 UNF	11.12 mm	16.28 mm
Dash 10	7/8-14 UNF	14.27 mm	20.24 mm
Dash 12	1 1/16-12 UNF	17.47 mm	23.82 mm
Dash 16	1 5/16-12 UNF	22.20 mm	30.50 mm
Dash 20	1 5/8-12 UNF	28.50 mm	35.81 mm

Part number: AR8374
Material: aluminium, anodized
Angle: 90° block (flatter than AR8373)
Hose: classic steel flex AR8394, not PTFE core

Fitment

Cut the hose square, assemble the fitting per the instructions. Dash size must match hose and counterpart. Do not mix this up with standard 90° AR8373: same angle, different height. For PTFE Teflon hose use PTFE fittings. 45° block angle AR8372 is a separate item.