69,00 € *
sofort verfügbar
Description
It's a complete kit for upgrading an oil cooler to your vehicle.
An oil cooler is essential for many tuned cars, because the oil temperature can be lowered up to 40°C!
The set consists of a large oil cooler, 2 braided hose lines as well as an adapter flange (without thermostat control).
The oil cooler can be mounted at any point, we recommend a rubber-cushioned installation. The braided hoses can be cut arbitrarily.
The supplied adapter plate has to be mounted between the engine block and oil filter. The required bolt/adapter is included.
It has 2 outputs M10x1, which can be used to measure the oil temperature and oil pressure.
Technical details:
Oil cooler:
-Total length: 330mm
-Height without connectors: 147mm (19 lines)
-Depth: 50mm
-Dimensions: Dash 8, 3/4 "-16 UNF
Lines:
-Braided hose
-Length: ~ 110cm to 130cm
-Connection: Dash 8, 3/4 "-16 UNF
-Outside diameter: ~ 20 mm
-Internal diameter: ~ 14mm
-Working pressure: up to 30 bar
-Operating temperature: up to 160°
Adapter plate:
-Dimensions 1: 3/4 "-16 UNF
-Dimensions 2: M20 x 1.5
-Bore Center: 24mm
| Item number: | 2534 |
| Thread: | Dash 8 |
