Description
SILICONE AR3084
Arlows silicone hose sold by the metre 10 mm Black
Sold by the metre, 10 mm inside.
Sold by the metre, 10 mm inside. Quantity 1 is 1 metre. For control air, vacuum and water, not for 5 bar boost. Colour Black. Multilayer with fabric, logo on one side only, the other stays blank.
BY THE METRE
Quantity 3 = 3 metres. For vacuum and control lines up to 1 bar.
PRESSURE
-0,5 to +1 bar. Temperature -40 °C bis 220 °C.
INSIDE SIZE
The size is the inside diameter. Clamp: inside diameter plus twice the wall.
NOT FOR FUEL
Charge air, intake air, coolant, heater. Not petrol, not oil.
Use cases
- Charge air: charge pipe, throttle, intercooler, up to the stated pressure
- Intake: vacuum and control lines
- Water: coolant and heater, not fuel
Technical data
| Part number | AR3084 |
| Form | sold by the metre |
| Inside diameter | 10 mm |
| Colour | Black |
| Wall | 2,5 mm |
| Length | 1 metre each |
| Outside diameter | 15 mm |
| Pressure | -0,5 to +1 bar |
| Temperature | -40 °C bis 220 °C |
| Plies | 3 to 6, depending on diameter |
Fitment
Deburr the pipe or stub. Do not run the hose above the stated pressure. Clamp size = inside diameter plus twice the wall (2,5 mm). Up to 3 mm stretch if the nominal size is just short. Turn the logo inward if the run should stay blank. Do not use with fuel or oil.