Description
VW / Audi Con-Rod Set
Fitting at following VW / Audi 2,0L engines:
- VW Golf 2 2,0L 16V
- VW Golf 3 2,0L 8V 2E
- VW Golf 3 2,0L 16V ABF
- VW Passat 2,0L 16V
This highquality con-rods are made of 4340 steel (40CrNiMoA).
Con-rods with the I-shank are the strongest and most resistant rods at all.
That's why these I-shank rods also get used by US-Dragster and Formula 1 Racecars.
The structural analysis of the I-shank shows, that it can absorb the most axial section modulus without deforming.
They're perfectly suited for high-power engines.
At first this con-rods got many times hardened to achieve an durability of HRC35-38.
Finally they got shot-blasted to strenghen the surface density to the maximum.
Before all of our con-rods are 3D designed and finally CNC-milled, it's possible to simulate a lot of charge states and tensions.
The small-end-bearing is made of bronze, and is suited with an lubrication bore.
The special thing about this "Pro"-Version is, that it is suited with an oil rise bore. This oil rise bore provides the piston pin with fresh oil.
Allowance:
Piston pin bore: +-4/1000mm
Crank pin bore: +-4/1000mm
Verticality, paralellism und deformation: +-5/1000mm
Weight: +-1 Gramm
Technical specifications:
Material: 4340 Stahl (40CrNiMoA)
Tenacity: >1250N/mm²
Length: 159mm
Piston pin bore: 21mm
Upper width:
Crank pin bore: 50,61mm
Lower width:
Weight incl. screws: 549 Gramm
(Original: 675 Gramm)
Employment:
- approved for up to 9000upm
- approved for up to 200hp per con-rod
| Item number: | AR6886 |