Description
PUSH ON 135° AR8380
Arlows Push On Aluminium AN Dash Fitting 135°
Push on. More than 90°. Less than 180°.
Anodized aluminium fitting with a push on barb and a 135° body. For Dash rubber hose, not for steel flex and not for PTFE. Pick Dash size above. AN thread on the port side, hose slides on the barb without a clamp. When 90° AR8379 does not fold enough and the rubber must not kink itself.
PUSH ON
Slide the hose onto the barb. No crimp, no olive, no clamp.
135° ANGLE
A strong turn. The line comes back at an angle without a full reverse.
ANODIZED ALU
Light, corrosion resistant, race look. Pick colour above.
AN DASH
AN thread to the block, filter or adapter. Size must match the rubber hose.
Use cases
- Fuel and oil: feed, return, breather, catch can, when the line almost has to run back
- Air: vacuum, breather, blow off recirculation
- Tight bay: at the block, frame and cooler, where 90° is not enough
- Not for: PTFE Teflon AR9106 / AR9107 and classic steel flex AR8394
Technical data
| Dash | Thread | ID | OD |
|---|---|---|---|
| Dash 4 | 7/16-20 UNF | 5.56 mm | 11.13 mm |
| Dash 6 | 9/16-18 UNF | 8.73 mm | 13.89 mm |
| Dash 8 | 3/4-16 UNF | 11.12 mm | 16.28 mm |
| Dash 10 | 7/8-14 UNF | 14.27 mm | 20.24 mm |
| Dash 12 | 1 1/16-12 UNF | 17.47 mm | 23.82 mm |
| Dash 16 | 1 5/16-12 UNF | 22.20 mm | 30.50 mm |
| Dash 20 | 1 5/8-12 UNF | 28.50 mm | 35.81 mm |
- Part number: AR8380
- Material: aluminium, anodized
- Angle: 135°
- Hose: Dash rubber / push on hose
- Not for: steel flex AR8394, PTFE AR9106 / AR9107
- Sister parts: straight AR8377, 45° AR8378, 90° AR8379
Fitment
Cut the hose square, wet the barb lightly, push the hose on to the stop. Dash size must match hose and counterpart. Push On holds on the barb, no hose clamp. For high pressure, hot oil or E85 switch to steel flex or PTFE. Straight, 45° and 90° are separate items.