Description
This is an exhaust cutout / flap for universal retrofitting in a car / motorcycle
This exhaust cutout is supposed to be welded in at a straight place in the exhaust system.
The flap opens / closed with underpressure.
Included is a control unit which controls the cutout / flap with 2 remotes.
This valve is located between the intake manifold and the exhaust cutout / flap.
By pressing the remote, the exhaust cutout / flap can be opened or closed via underpressure.
There are two different versions of our cutout / flap:
Version 1: closed base position in the unpressurized state ( the cutout / flap opens with underpressure )
Version 2: open base position in the unpressurized state ( the cutout / flap closes with underpressure )
The flap is made of very high quality and is very massive.
All parts are made of stainless steel.
The mechanism is mounted with ball bearings.
Specification:
Diameter: 2" / 50,8mm
Version: closed base position in the unpressurized state
Thickness: 40mm
Outer diameter with siphon: 150mm
Material: Stainless steel
| Item number: | AR6484 |
| Diameter: | Ø 60mm / 2,375" |