Arlows Aluminum Cone (AlMgSi0,5 Alu Reducer) 102mm / 89mm

Arlows Aluminum Cone (AlMgSi0,5 Alu Reducer) 102mm / 89mm

37,50 €

incl. 19% VAT , plus (Paketversand)

From	Unit price
2	36,38 €*
3	36,38 €*
4	35,25 €*
5	35,63 €*
8	34,13 €*
10	33,75 €*

Aluminium cone ( AlMgSi0,5 Alu reducer )

diameter

Available now!
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Description

AR8729 · AlMgSi0.5

Arlows aluminium cone AlMgSi0.5 reducer

Weld-on end with bead. The hose sits firmly when the clamp closes.
Short end piece in AlMgSi0.5 (EN AW-6060). The bead gives the silicone hose a stop. Weld it to the aluminium tube, then fit hose and clamp. Diameter pair is selected in the variant (larger to smaller).

Why this cone?

BEAD

The hose has a stop and does not creep under the clamp. Secure hold under boost and vibration.

WELD ON

Weld to the tube, then hose and clamp. Same alloy as the Arlows straight tubes and bends. Clean weld with TIG or MIG.

REDUCTION

Transition from larger to smaller diameter. Connects charge pipe to silicone hose or water feed.

LIGHT

Aluminium saves weight. Corrosion resistant. For custom piping in charge air and cooling circuits.

Use cases

Charge pipe to silicone hose (charge pipe to intercooler or turbo)
Water feed when the hose needs a bead
Custom hard lines for water or oil coolers
Not for fuel without material check and proper seals

Technical data

Part number	AR8729
Material	Aluminium AlMgSi0.5 (EN AW-6060)
Form	weld-on end with bead
Diameter	see variant selection (larger / smaller pair)
Processing	weld, deburr

Fitment

Match the diameter to the tube and hose. Deburr the ends. Weld to the aluminium tube (prefer the same alloy). Then slide on the silicone hose and tighten with a clamp (double wire or bolt clamp). The bead stops the hose from slipping.

Matching tubes and bends?

Same alloy

SHOP ALUMINIUM TUBES >

SKU:

33,90 € *

sofort verfügbar

Lieferzeit: 1 - 2 Werktage