Arlows AL7075 socket cap screw M8 × 25 mm gold – 1-pack

0,90 €

incl. 19% VAT , plus (Paketversand)

From	Unit price
5	0,86 €*
10	0,83 €*
25	0,79 €*

Arlows AL7075 socket cap screw M8 × 25 mm gold – 1-pack
AL7075 aluminium socket cap screw with hex socket drive and gold anodised finish. M8 × 25 mm; supplied as a 1-pack for suitably designed, non-safety-critical fixings.

For applications with matching threads, clearance and seating surfaces.
Not a general replacement for structural or safety-critical steel bolts.

Available now!
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

Description

AL7075 · M8x25 · GOLD

Arlows AL7075 socket cap screw M8 × 25 mm gold – 1-pack

AL7075 aluminium socket cap screw with hex socket drive and gold anodised finish. M8 × 25 mm; supplied as a 1-pack for suitably designed, non-safety-critical fixings.

Why choose this aluminium screw?

COLOUR IN THE DETAILS

The gold anodised finish adds a deliberate colour accent to visible fasteners.

MATCHING HEAD STYLE

Socket cap screw with hex socket drive. Match the head profile and tool access to the installation point.

CLEAR VARIANT SELECTION

M8, 25 mm nominal length and 1 pieces: key selection details are clearly specified.

Applications

For suitably designed, lightly loaded, non-safety-critical fixings, for example fairings, decorative covers or number plate panels. Suitability for a particular joint depends on load, mating material, thread engagement and head seating. Vehicle-specific fitment is not implied.

Specifications

Brand	Arlows
Material	AL7075 aluminium
Nominal thread diameter	M8
Nominal length	25 mm
Head style	Socket cap screw
Drive	Hex socket
Finish / colour	Gold anodised
Pack quantity	1-pack
Item number	AR3903

Thread pitch, hex-key size, head dimensions, temper, strength class, DIN/ISO standard and tightening torque are not specified in the supplied product data. Confirm these before ordering where dimensions or load capacity are critical.

Supplied items

1× Arlows socket cap screw M8 × 25 mm, AL7075, gold anodised

Nuts, washers and tools are not listed as supplied items.

Installation & notes

Before fitting, compare thread diameter, pitch, required length, head dimensions and seating surface with the existing joint. The second number in this size designation denotes length, not thread pitch.
Clean the threads and inspect them for damage. Start the screw by hand; do not force it if resistance occurs. Fully engage a correctly fitting hex key.
Use only a tightening torque approved for this aluminium screw and the specific joint. Do not transfer steel-bolt torque values without verification. Use lubrication and thread locking only as specified for the joint.
Use a suitable washer or protective interface where required by the joint on delicate surfaces. After installation, check seating, clearance and operation of the attached component.

Do not substitute at brake calipers, suspension, steering, structural frame joints or other safety-critical fixings unless this exact screw and application have explicit engineering approval.

Common question: will this screw fit?

Selection depends on the thread, length, head style and joint loading. The size designation alone does not confirm suitability as a replacement for any original bolt.