Description
Arlows heat-sleeve with hook-and-loop, approx. 80 mm I.D., 1 metre
Sold by the metre. Quantity 2 means 2 metres of sleeve.
The sleeve opens along its length. A sewn-in hook-and-loop strip closes it around a line that is already fitted. Plugs and fittings can stay on.
Construction and temperature
- Inner layer: high-temperature Kevlar fabric
- Outer layer: aluminium coating that reflects radiant heat
- Continuous use: up to 300 °C
- Short-term: up to 1000 °C (fabric and coating, not the hook-and-loop tape)
- Inside diameter: approx. 80 mm, about ± 5 mm because of the closure
Keep the hook-and-loop seam off the manifold or downpipe. Add stainless ties if the sleeve can slide.
Use
Open, wrap, close. Intended for lines and bundles that sit in an 80 mm sleeve:
- Large wiring looms
- Several fuel or oil lines together
- Thick coolant and hydraulic hoses of matching outside diameter
- Radiant heat on the line ? not an open flame on the pipe itself
Applications
Engine bays, turbo surroundings, transmission tunnels, industrial plant. A sleeve for lines, not a wrap for the exhaust primary and not a substitute for a heat shield on the pipe wall.
Scope of delivery: 1 metre of sleeve per unit ordered, approx. 80 mm I.D., hook-and-loop closure.
| Item number: | AR1797 |
| Contents: | 1,00 m |