Arlows AL7075 conical button head screw type ii M5 × 20 mm blue – 1-pack

AL7075 aluminium conical button head screw type ii with hex socket drive and blue anodised finish. M5 × 20 mm; supplied as a 1-pack for suitably designed, non-safety-critical fixings.

Why choose this aluminium screw?

Applications

For suitably designed, lightly loaded, non-safety-critical fixings, for example fairings, decorative covers or number plate panels. Suitability for a particular joint depends on load, mating material, thread engagement and head seating. Vehicle-specific fitment is not implied.

“Conical” is the product designation for the head profile. It does not establish a countersunk-head standard or a particular countersink angle. Check the actual seating geometry before fitting.

Specifications

Thread pitch, hex-key size, head dimensions, temper, strength class, DIN/ISO standard and tightening torque are not specified in the supplied product data. Confirm these before ordering where dimensions or load capacity are critical.

Supplied items

• 1× Arlows conical button head screw type ii M5 × 20 mm, AL7075, blue anodised

Nuts, washers and tools are not listed as supplied items.

Installation & notes

1. Before fitting, compare thread diameter, pitch, required length, head dimensions and seating surface with the existing joint. The second number in this size designation denotes length, not thread pitch.
2. Clean the threads and inspect them for damage. Start the screw by hand; do not force it if resistance occurs. Fully engage a correctly fitting hex key.
3. Use only a tightening torque approved for this aluminium screw and the specific joint. Do not transfer steel-bolt torque values without verification. Use lubrication and thread locking only as specified for the joint.
4. Use a suitable washer or protective interface where required by the joint on delicate surfaces. After installation, check seating, clearance and operation of the attached component.

Do not substitute at brake calipers, suspension, steering, structural frame joints or other safety-critical fixings unless this exact screw and application have explicit engineering approval.

Common question: will this screw fit?

Selection depends on the thread, length, head style and joint loading. The size designation alone does not confirm suitability as a replacement for any original bolt.