Description
Arlows heat-sleeve with hook-and-loop, approx. 105 mm I.D., 1 metre
Sold by the metre. Quantity 2 means 2 metres of sleeve.
The sleeve opens along its length. A sewn-in hook-and-loop strip closes it around a line that is already fitted. Plugs and fittings can stay on.
Construction and temperature
- Inner layer: high-temperature Kevlar fabric
- Outer layer: aluminium coating that reflects radiant heat
- Continuous use: up to 300 °C
- Short-term: up to 1000 °C (fabric and coating, not the hook-and-loop tape)
- Inside diameter: approx. 105 mm, about ± 5 mm because of the closure
Keep the hook-and-loop seam off the manifold or downpipe. Add stainless ties if the sleeve can slide.
Use
Open, wrap, close. Intended for large lines and bundles that sit in a 105 mm sleeve:
- Very large wiring looms
- Several fuel or oil lines together
- Thick coolant, charge-pipe or hydraulic hoses of matching outside diameter
- Radiant heat on the line ? not an open flame on the pipe itself
Applications
Engine bays, turbo surroundings, transmission tunnels, industrial plant. A sleeve for lines, not a wrap for the exhaust primary and not a substitute for a heat shield on the pipe wall.
Scope of delivery: 1 metre of sleeve per unit ordered, approx. 105 mm I.D., hook-and-loop closure.
| Item number: | AR1798 |
| Contents: | 1,00 m |