Description
Arlows flexible ventilation hose
Bends without collapsing. Takes the heat next to the pipe.
Black ventilation hose with a wire helix. The wire holds the section in a tight radius, the weight stays low. Quantity 1 is 1 metre. Order more and the length comes in one piece, not as separate metres.
The bore is in the product name. This text covers every size in the same line.
Why this hose?
WIRE
Helix between the layers. The hose does not close in a bend. Smooth silicone without a wire does not do that.
310 C
Temperature range -85 °C to +310 °C. For air next to the exhaust, the brake and the engine bay, not for fuel or oil.
AIR
Cold air intake, brake cooling, cabin air, fan duct. Not a boost hose and not a fuel hose.
NOT ONLY CARS
Generator canopy, cabinet, machine cooling, boat bay, workshop extraction of warm air. The bore must match the spigot.
Use cases
- Intake air and cold air routing
- Brake cooling from the bumper to the disc
- Cabin and helmet air in a race car
- Genset, hydraulic pack, cabinet, wherever hot air has to leave
- Not for petrol, oil, coolant or boost silicone
Technical data
| Length | 1 metre per quantity, larger orders in one piece |
| Colour | black |
| Build | flexible, wire helix |
| Temperature | -85 °C to +310 °C |
| Bore | stated in the product name |
| Medium | air |
Fitment
Slide it onto the spigot, do not drag it over a sharp edge. Clamp with a double wire clamp, or the helix slips when you tighten. A smooth band clamp is the wrong clamp for this hose. Cut with extra length and hold the wire with pliers so the end does not fray.
| Item number: | AR12408 |
| Contents: | 1,00 m |