Arlows Ø 40mm auf 35mm Silikon Schlauch 45° Reduzierer ( Schwarz ) Reduzierbogen

16,49 €

including 19% VAT. , plus (Paketversand)

From	Price per unit
2	16,00 €
4	15,50 €
8	15,01 €

Description

SILICONE AR3001

Arlows silicone hose reducer elbow 40 mm to 35 mm Black

Reducer elbow 40 mm to 35 mm.
Reducer elbow 40 mm to 35 mm. Two diameters and one turn in one part. Colour Black. Multilayer with fabric, logo on one side only, the other stays blank.

FABRIC

3 to 6 plies in the wall, depending on diameter. The hose holds shape under pressure.

PRESSURE

-0,5 to +5 bar. Temperature -40 °C bis 220 °C.

INSIDE SIZE

The size is the inside diameter. Clamp: inside diameter plus twice the wall.

NOT FOR FUEL

Charge air, intake air, coolant, heater. Not petrol, not oil.

Use cases

Charge air: charge pipe, throttle, intercooler, up to the stated pressure
Intake: vacuum and control lines
Water: coolant and heater, not fuel

Technical data

Part number	AR3001
Form	reducer elbow
Inside diameter	40 mm to 35 mm
Colour	Black
Wall	4,3 mm
Length	150 mm
Pressure	-0,5 to +5 bar
Temperature	-40 °C bis 220 °C
Plies	3 to 6, depending on diameter

Fitment

Deburr the pipe or stub. Do not run the hose above the stated pressure. Clamp size = inside diameter plus twice the wall (4,3 mm). Up to 3 mm stretch if the nominal size is just short. Turn the logo inward if the run should stay blank. Do not use with fuel or oil.

Other size or colour?

Elbow, reducer, hump, T piece

SHOP SILICONE HOSES >

Item number:	AR3001
Colour‍:	Black
Material‍:	Silikon
manufacturer‍:	Arlows
Version‍:	Reducer
Angle‍:	45°
Diameter‍:	Ø 40mm

Importeur / EU-Verantwortlicher