Description
This is a complete connection set for retrofitting an oil cooler to your vehicle. This oil cooler connection set is suitable for many vehicles.
An oil cooler is really important for tuned vehicles because the oil temperature is hereby set down to 40 °.
The set consists of 2 from steel bainded hoses and an adapter flange (without thermostat control)
The oil cooler can be mounted anywhere on the vehicle, we recommend to mount these with rubber bearings.
The hoses can be shortened arbitrarily.
The supplied adapter plate is mounted between the engine block and oil filter.
The needed bolt/adapter is included.
It has 2 outputs M10x1, which can be used to measure the oil temperature and oil pressure.
Technical details:
Connections:
-From steel bainded
-Length: ~ 130cm
-Connection: Dash 8, 3/4 "-16 UNF
-Outside diameter: ~ 20 mm
-Internal diameter: ~ 14mm
-Working pressure: up to 30 bar
-Operating temperature: up to 160°
Adapter plate:
-Dimensions 1: 3/4 "-16 UNF
-Dimensions 2: M20 x 1.5
-Bore Center: 24mm
| Item number: | TT00810 |
| Thread: | Dash 8 |
